can i notch out joists of the second floor? any structure engineer here?

hannahxue · 发表于 2015-11-19 12:03

i want to make a zero entrance shower, need the floor under the shower sink down 1.5". can i notch down joists for 1.5" deep? and how to reinforce the notched joist after cutting? the joists closed to the end of house. thanks for your valuable input.

小黄 · 发表于 2015-11-19 12:21

房子在设计阶段还是已经造了？

hannahxue · 发表于 2015-11-19 13:32

it is renovation for the master bathroom. thanks. the joist is I beam shape

小黄 · 发表于 2015-11-19 14:34

hannahxue 发表于 2015-11-19 13:32
6 D5 U8 D2 H8 D1 [; e' t1 Git is renovation for the master bathroom. thanks. the joist is I beam shape

你是揭开了楼板?

hannahxue · 发表于 2015-11-19 14:44

yes, after removing existing shower enclosure. the city inspector just came and said i can cut joists, unless it is proved by structure engineer. so i give up now.

小黄 · 发表于 2015-11-19 15:43

hannahxue 发表于 2015-11-19 14:44
6 n( C9 ^0 O* M4 ~yes, after removing existing shower enclosure. the city inspector just came and said i can cut jois ...

其实没那么难，但是一般工程师不会费那个事。

账号		自动登录	找回密码
密码			注册